Enduro Bearings Abec 3 Double Row Series

Enduro ABEC 3 bearings represent the majority of bearings on the market, ABEC 0 or ABEC 1, one or two levels lower. The balls are Grade 5 and the seals one on each side (2RS) are double lipped (LLB or LLU). These bearings are lubricated with a high Teflon grease (Rheolube 7703 grease).

ABEC 3 Enduro Bearing has several levels of sealing

• “2RS” has 2 rubber seals on each side for the highest protection available.
• “LLB” is a double-lip, low-contact labyrinth seal bearing.
• “LLU” is a medium contact double lip seal labyrinth groove bearing.
• “MAX” is a bearing that does not have a retainer cage, but a specific filling slot for the connecting rods allowing a 35% higher load resistance, so they are particularly recommended for rear suspension pivots, bottom brackets or anywhere else where a standard bearing wears out prematurely.

Reference / Application

• DRF30412RSSS: 30 x 41 x 11 (35.6 g)

MORE INFORMATION